SprayNSeal Instant Rubber Roof Repair is an instant leak sealer and coating that adheres to most substrates (except silicone). It features a superior, fast setting, rapid curing spray on elastomer with UV resistance that provides a flexible, non-cracking, non-peeling coating that is paintable and long lasting. Once cured, it will help prevent rust and corrosion.
60030 SprayNSeal Instan Rubber Roof Repair
Designed especially for RV rubber roofs, such as EPDM, TPO, or PVC, SprayNSeal Instant Rubber Roof Repair is also ideal for general maintenance and emergency leak repairs on non-pressurized pipes, skylights, flashing, ductwork, drainpans, swamp coolers, and more. SprayNSeal Instant Rubber Roof Repair withstands temperatures of -30°F to 200°F(-29°C to 93°C) without cracking and peeling. The elastomer coating remains flexible after drying and can accommodate elongation of up to 500%.
SprayNSeal Instant Rubber Roof Repair may also be applied under wet conditions. Spray evenly to cover surface. Adheres to all surfaces such as wood, plastic, rubber, fiberglass, metal, brass, bronze, tile, and painted surfaces. Can be painted once dry. Dries in 20 minutes at 70°F. Sprays on in seconds and is fast setting with gap filling capability up to 3/16”.
One 16 oz. can covers up to 30 square feet.
Surface must be clean and dry prior to application. Remove cap. Shake can well for 60 seconds after agitator ball rattles. Hold can 6 to 8 inches away from surface to be repaired. Apply in short even strokes until evenly coated. Work product into deep cracks or punctures with brush or smoothing tool. Allow surface to dry for 15 minutes before use. Additional applications can be made to repair larger areas. For additional adhesion
strength, apply product heavy and back roll to create uniform membrane layer. Clean up with paint thinner or mineral spirits. After use, turn can upside down and spray to remove material from spray tip before storing.
CAUTION: EXTREMELY FLAMMABLE. CONTENTS UNDER PRESSURE.
Keep out of the reach of children. Vapor harmful. Avoid breathing of vapors or mist. Avoid contact with skin or eyes. Do not apply to energized equipment. Do not use near fire, sparks, or open flame. Do not puncture or incinerate container. Exposure to temperatures above 120° may cause bursting.
In accordance with CA Proposition 65, this product contains chemicals known to cause cancer, birth defects, and other reproductive harms.
Hydrocarbon Propellant(68476-86-8), Xylene (1330-20-7)Aromatic Hydrocarbom (108-88-3), Aliphatic Hydrocarbon (110-54-3), Poly butadiene-co-styrene (9003-55-8).
KEEP OUT OF REACH OF CHILDREN
Proudly Made in the USA